Ikelite 71702 200DL Underwater Housing for Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR Cameras
The Ikelite 71702 200DL Underwater Housing is a full featured and durable waterproof housing for Canon EOS 5D Mark III, 5D Mark IV, 5DS, and 5DS R DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
The new DL series ports are lighter and more adaptable than their FL counterparts. They accommodate popular large diameter, full-frame lenses with ease.
Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using.
This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.
The included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe.
This housings supports your choice of shooting with manual strobe exposure or adding a TTL converter depending on your application. The flash bulkhead is located on the top of the case to alleviate strain on the sync cord.
The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
The new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun. This material is 1/3 of the specific gravity of aluminum, making the housing much lighter and fundamentally corrosion free.
In the box: Housing, Rear O-Ring # 0132.61 (installed), O-ring front # 0132.45 (installed), Zoom Gear Retainer # 75900 (installed), Port Hole Cover # 0200.92 (installed), Waterproof bulkhead cap # 9104.7 (installed), Base with quick release for the left hand # 4077.67 (installed), Tool for Zoom Gear Retainer # 0945.06, . 050 “hex-key # 0945.11, # 26 “hex-key # 0945.16, Silicone lubricant 1cc tube
- 200′ (60m) depth rating
- Compatible with DL system lens ports
- 1/4-20 thread base mounts with 3.5″ spacing
- Near neutral buoyancy in fresh water
- Actual buoyancy varies depending on choice of lens and port
- weight 5.1 lb (2.3 kg)
- dimensions 9.2 x 7.1 x 6.5″ (234 x 180 x 165 mm)
This housing is only compatible with Canon EOS 5D Mark III, 5D Mark IV, 5DS, and 5DS R cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other camera models from being used in this housing. This housing is not usable with prior A7R I or II cameras. We are not aware of any other models which may be used in or adapted to this particular housing.