Ikelite 71704 200DL Underwater housing for Canon EOS 7D DSLR

2.130,00 

Ikelite 71704 UW housing for Canon EOS 7D DSLR

5-12 Arbeitstage

EAN: 883711056074 SKU: IKE-71704 Categories: ,

Description

Ikelite 71704 200DL Underwater housing for Canon EOS 7D DSLR cameras

The Ikelite 71704 200DL Underwater housing is a full featured and durable waterproof housing for Canon EOS 7D DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

This housing features our robust new Dry Lock (DL) port system. “Dry Lock” refers to the placement of the o-ring on the outside of the port mount. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.
Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Zoom gears sold separately.

This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.

The included vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.

This Ikelite 71704 200DL Underwater housing for Canon EOS 7D DSLR cameras supports your choice of shooting manual strobes or adding TTL electronics depending on your application. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations. You can enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit # 46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.

All push button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off. The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.

The new ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.

What´s included: Housing, Rear O-Ring # 0132.61 (installed), O-Ring Front # 0132.45 (installed), Zoom Gear Retainer # 75900 (installed), Port Hole Cover # 0200.92 (installed), Waterproof bulkhead cap # 9104.7 (installed), Base with quick release for the left hand # 4077.67 (installed), tool for Zoom Gear Retainer # 0945.06,. 050 inch hex key # 0945.11, # 0945.11, # 0945.16 inch hex key # 0945.16, silicone lubricant 1cc Tube

Specifications:

  • 200 ‘ (60m) dive depth
  • Compatible with DL system lens ports
  • Controls are provided for all important camera controls; Controls are not provided for LCD panel illumination button, Depth-of-field preview button, Dioptric adjustment knob, Multi-function (M-Fn) button, Quick Control Dial switch, Lens lock pin, and Multi-controller
  • 1/4-20 thread base mounts with 3.5″ spacing
  • Near neutral buoyancy in fresh water
  • Actual buoyancy varies depending on choice of lens and port
  • Weight 4.8 lb (2.2 kg)
  • Dimensions 9.2 x 7.1 x 6.6 inches (234 x 180 x 168 mm)
  • Vacuum valve included (pump sold separately)
  • Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
  • ABS PC construction is fundamentally corrosion resistant

Compatibility:
This housing is only compatible with Canon EOS 7D camera as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories. Differences in lens and control placement prevent other DSLR models, including the newer EOS 7D Mark II, from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.

Additional information

Weight 2,722 kg
Dimensions 37,5 × 24 × 22 cm
Hergestellt in:

USA

Tauchtiefe

60m / 200ft

You may also like…