Ikelite 71724 200DL Underwater housing for Canon EOS 800D

1.905,00 

Ikelite 71724 UW housing for Canon EOS 800D rebel T7i, Kiss X9i

5-12 Arbeitstage

EAN: 883711055848 SKU: IKE-71724 Category:

Description

Ikelite 71724 200DL Underwater housing for Canon EOS 800D rebel T7i, Kiss X9i DSLR Cameras

The Ikelite 71724 200DL Underwater housing is a fully functional and durable waterproof housing for Canon EOS 800D Rebel T7i, Kiss X9i DSLR cameras. Suitable for diving, snorkeling, surfing, in the pool and any application in or around the water.

DL ports are the lightest on the market, but rugged and able to withstand rougher surf. The fastening is fast and safe. A system of extensions can accommodate a wide variety of lenses with ease. Due to differences in mounting diameter and zoom, DL and FL system connections cannot be used in a synonym.

This housing also requires a compatible lens port. This is not included in the scope of delivery.

The supplied vacuum valve allows you to put the housing under pressure to check for leaks before taking your expensive equipment into the water. The use of the vacuum valve requires a compatible vacuum pump with pressure gauge # 47011, available separately.

This enclosure supports the choice of manual flash images or the addition of TTL electronics depending on the application. The new modular electronics system allows the housing to be updated with future flash communication products as soon as they are available. The Lightning barrier has been moved to the top of the housing to improve the cable management and reduce the load. Reliable locking connections between the hot shoe and the splash wall facilitate the installation of the optional TTL electronics or the taking of spare parts when travelling.
You can enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit # 46070 and a compatible Ikelite DS flash. The exposure compensation can be added or subtracted in the camera.

The camera is mounted from the front and allows easy installation and removal. A small mounting plate is attached to the underside of the camera and attached to the front of the case. The camera mounting plate does not need to be removed from the camera for use on the surface or when changing the battery or memory cards. The mounting plate has a 1/4 -20 thread mount on the underside so that it can be attached to a tripod on the surface.

The new ABS-PC Blendfront is stronger than the clear counterpart, offering better contrast and better visibility and keeping your camera cooler in the sun.

Sea & Sea, INON and Retra flashes with an electrical connection can be triggered in manual exposure modes with an electrical synchronisation cable. Flashes without an electrical sync cable connection cannot be connected to this system if they are not removed from a hard-wired flash.

Older non-digital flashes with an ICS-5 socket for the electrical synchronous cable can be used with this system in manual exposure modes.

Fiber optic flashes are not compatible with this installation. An external flash must be connected via an electrical synchronous cable.

Flashes Remote slave functions can be triggered by a flash that is attached to the housing with the electrical synchronisation cable. Ikelite DS Lightning Bolts support remote tripping with the optical slave converter # 4403 or the Water Wizard system (manufactured and distributed by Aquatica).

In the box: Housing, Rear O-ring # 0132.59 (installed), Front O-ring # 0132.45 (installed), Zoom Gear Retainer # 75900 (installed), Port Hole Cover # 0200.92 (installed), Waterproof Bulkhead Cap # 9104.7 (installed), Base with Left-Hand Quick Release Handle # 4077.67 (installed), Tool for Zoom Gear Retainer # 0945.06, .050″ Hex Key # 0945.11, 1/16″ Hex Key # 0945.16, Silicone Lubricant 1cc tube

Specifications:

  • 200 ‘ (60m) dive depth
  • Compatible with DL system lens ports
  • Controls for all important camera controls except for the LCD backlight button, the depth of Focus Preview button, the diopter adjustment knob and the multi-function lock switch
  • 1/4-20 threaded Base with 3.5 “spacing
  • Almost neutral buoyancy in freshwater
  • Actual buoyancy depending on the choice of lens and ports
  • Weight 2.1 kg
  • Dimensions 9.2 x 7.1 x 6.5 inches (234 x 180 x 165 mm)
  • Vacuum valve included (pump available separately)
  • Includes Ikelite ICS-5 Bulkhead connection with manual hotshoe for reliable electric tripping of underwater strobe; Optional TTL accessory provides automatic exposure with compatible Ikelite DS strobes
  • ABS-PC construction is basically corrosion resistant

Compatibility:
This enclosure is only compatible with the Canon EOS 800D, EOS rebel T7i and Kiss X9i DSLR cameras supplied by the manufacturer. Unless otherwise indicated, no additional grips, battery handles, eyepieces, LCD covers or other accessories are included in this enclosure. Differences in lens and control placement prevent other DSLR models from being used in this housing. No other models are known that can be used or customized in this particular housing.

Additional information

Weight 2,359 kg
Dimensions 37,5 × 24 × 22 cm
Hergestellt in:

USA

Dive depth

60m / 200ft

You may also like…